SUMA ULTRA

Suma Ultra is a heavy-duty alkaline liquid detergent designed for single and multi-tank automated warewashing machines. Formulated primarily for soft to medium water environments, it combines aggressive caustic alkalis with advanced sequestering agents. It easily cuts through baked-on foods, heavy greases, and fats while simultaneously protecting internal machine elements from mineral scaling.

• Maximum Grease Cutting: Rapidly binds and dissolves stubborn lipids, proteins, and dried-on starch residues. 
• Scale Prevention: Built-in sequestrants actively resist lime deposits on internal heating elements and nozzles in soft water up to 80 ppm CaCO₃. 
• Low-Foaming Action: Formulated to suppress foam generation, ensuring the mechanical dishwashing pumps maintain optimal pressure and spray coverage. 
• High-Dilution Economy: Highly concentrated chemical matrix allows minimal dosing volumes to deliver vast industrial output.

• Active Composition: Caustic Alkalis (Sodium Hydroxide solution) mixed with specialized scale-control chelating agents.
• Physical State / Appearance: Clear, pale-yellow to light-green liquid.
• pH Level (Neat / Concentrated): Highly alkaline, ranging between 13.5 and 13.7.
• pH Level (1% Dilution): Approximately 12.3.
• Relative Density: ~1.27 g/cm³ at room temperature.
• Available Commercial Sizes: Distributed primarily in heavy-duty 5-Litre cans, 20-Litre drums, and bulk 25-Litre plastic containers.

• Commercial Dishwashing: Automatically dosed directly into single-tank hood machines or multi-tank conveyor tunnel dishwashers. 
• Food Processing Machinery: Employed to strip fats and oils from heavy stainless steel kitchen equipment, preparation racks, and processing lines. 
• Utensil & Glass Warewashing: Restores clarity and grease-free sheen to porcelain, crockery, tray lines, and high-volume glassware. 
• Recommended Dilution: Normally regulated using a automated Diversey dispenser system. Standard dosage varies from 1 to 4 grams per Litre (typically ~2 g/L) based on local water quality and soil load.

• Material Restrictions: Do not use on alkali-sensitive materials including aluminum, copper, brass, or rubber components.
• PPE Requirements: Highly corrosive to living tissue due to severe alkalinity. Operators must wear chemical-resistant gloves, safety goggles, and protective aprons during canister swaps.
• First Aid Protocol: If skin or eye contact occurs, flush immediately with fresh water for at least 15 minutes and seek medical evaluation.
• Storage Environment: Keep upright inside original sealed packaging within a well-ventilated chemical cabinet. Avoid sub-zero freezing and temperatures exceeding 50°C.
• Pump Preservation: When starting the product on a new system, flush the transport lines and dosing pump with water to prevent crystallization caused by mixing incompatible chemical residues.